VBrick dme Admin Manual Download Page 173

Page: 173 / 219

VC Gateway Configuration

DME Admin Guide

161

Field

Description

Line Identity
IP, Host, or Domain

IP address, host name, or domain of the DME.

Total Number Lines

Read-only. The total number of incoming and outgoing lines
available depends on your license. See Configure a VC Gateway
Stream for line availability.

SIP Call RTSP Port

The default value is 554. This field value should match the value
in the

RTSP Server Port

field under System Configuration > Ports.

If the two fields do not match, the SIP Gateway will not function
correctly.

Number Incoming Lines Determines the number of available lines shown on the Incoming

Lines page. Total cannot exceed license.

Number Outgoing Lines Determines the number of available lines shown on the Outgoing

Lines pages. Total cannot exceed license.

Activate Incoming Line Automatically activate newly created incoming lines.

Call Outgoing Line

Automatically call newly created outgoing lines.

Video Resolution

Select from dropdown list. Sets the video encoding resolution (the
width and height respectively) of the compressed video stream.

P-Mode

Packetization mode defines the packetization rule for the
incoming/outgoing stream. Default = standard. Do not change
except as directed.

Summary of Contents for dme




























































































































































































































Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands

VBrick dme, Admin Manual

Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands