VBrick dme Admin Manual Download Page 179

Page: 179 / 219

DME Admin Guide

167

Chapter 13

Logging

Enable Error and Access History Logging

The

Error Log

on the Monitor > Error Log page displays DME status messages as well as

errors.

Access History

on the Monitor > Access History page shows files that have been accessed

since the last reset.

The

Logging

page specifies logging rotation and overwrite rules.



To specify logging rotation and overwrite rules:

1. Navigate to

Logging

Field

Description

Roll Logging

Check to enable the Error Log and/or the Access History rotation per
the

Roll log

defined settings. If this box is not selected, logging is still

enabled but it will continue to accumulate into individual log files
rather than being rotated per the roll log settings defined below.
Logged entries are shown the respective

Monitor

pages. The error log

displays DME status messages as well as errors. The access log shows
files that have been accessed since the last DME reset.

Roll log

Overwrite the logs every

nnn

KB or every

nnn

files (whichever comes

first).

Remote Logging

The DME can provide remote logging of system services. Use this
checkbox to enable and disable the service.

Remote Server
Address

Please provide the remote server IP/FQDN address here.

Remote Server Port Please provide the remote server port here; 514 is default.

Summary of Contents for dme




























































































































































































































Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands

VBrick dme, Admin Manual

Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands