manualshive.com logo in svg

VBrick dme, Admin Manual

The VBrick DME Admin Manual is a comprehensive guide that allows users to effectively manage and operate their VBrick DME system. Available for free download on our website, this manual provides step-by-step instructions and valuable insights to optimize your video streaming experience.

Share
Download
background image

162

© Vbrick Systems, Inc.

Cre a t e a Cu s t o m Au d io Ch im e o r We lc o m e M e s s a g e

A chime sound and a brief welcome message are played when placing or receiving calls to or 
from a video conferencing endpoint. You can replace these default audio files by uploading 
your own recordings that are created in .raw format only. 

The following steps explain how to create a .raw file on a Windows machine that has an audio 
recording device.

I-Frame Interval

Video conferencing systems do not send IDR frames although 
they are typically required for most stream players. This is the 
frequency at which IDR (Intra Dynamic Refresh) frames are 
inserted. Default = 5 seconds. 

Audio Bit Rate

Select from dropdown: 16K, 32K, 64K.

Log Level

• Debug – Provides verbose information (default).
• Info – Provides limited information. 

Max Number of Log 
Files

The maximum number of files allotted for logs.

Max Log File Size

The maximum file size for log files.

Never Hang Up

Do not hang up. If you leave the call connected it will 
automatically hang up after 720 minutes. Default = disabled. 

Incoming Maximum 
Call Time

Maximum duration for any call after which the system will 
automatically hang up. Default = 120 minutes.

Outgoing Maximum 
Call Time

Maximum duration for any call after which the system will 
automatically hang up. Default = 120 minutes.

Should Register

The session will be registered with a SIP Registration server if 
present. Default = Enabled.

Audio Welcome Prompt An audio message ("Welcome to Vbrick DME") or chime is 

played when placing or receiving calls to or from an endpoint. 
Select the type of welcome prompt preferred. To create a custom 
prompt, select 

User Configured

. See Create a Custom Audio 

Chime or Welcome Message for details. 

Automatic Record to 
Rev

Automatically record calls on DME and upload to Rev.

Automatic Record to 
VEMS

Set auto-record on VEMS Mystro.

VEMS Mystro Address

VEMS Mystro 6.x only. Set default VEMS Mystro IP address or 
host name for recorded files. If SSL is configured on the VEMS 
Mystro server, you must use a host name in this URL.

VEMS Mystro User

Set default VEMS Mystro user name.

VEMS Mystro Password Set default VEMS Mystro password.

Field

Description

Summary of Contents for dme




























































































































































































































Reviews:

No comments

Related manuals for dme

ZF ZF 25 A Operating Instructions Manual preview
ZF 25 A
Brand: ZF Pages: 80
Yanmar L48N Operation Manual preview
L48N
Brand: Yanmar Pages: 104
Dynamite Fuse DYN3754 Instruction Manual preview
Fuse DYN3754
Brand: Dynamite Pages: 28
INDUSTRIAS TECHNOFLEX PGH Instruction Manual / Spare Parts preview
PGH
Brand: INDUSTRIAS TECHNOFLEX Pages: 40
O.S. engine FR7-420 Manual preview
FR7-420
Brand: O.S. engine Pages: 18
Absima Revenge CTM Series Quick Start Manual preview
Revenge CTM Series
Brand: Absima Pages: 3
Volvo TAD734GE User Manual preview
TAD734GE
Brand: Volvo Pages: 72
Kingfisher KD14 Owner'S Handbook Manual preview
KD14
Brand: Kingfisher Pages: 10
Wacker Neuson WM 90 Repair Manual preview
WM 90
Brand: Wacker Neuson Pages: 108
Mitsubishi F9Q1 Workshop Manual preview
F9Q1
Brand: Mitsubishi Pages: 42
Nakayama 042815 Manual preview
042815
Brand: Nakayama Pages: 11
ABB MT series Instructions Manual preview
MT series
Brand: ABB Pages: 60
Zenoah G240RC Owner'S Manual preview
G240RC
Brand: Zenoah Pages: 36
WÄRTSILÄ WARTSILA 26 Product Manual preview
WARTSILA 26
Brand: WÄRTSILÄ Pages: 196
Oriental motor BLM230 Operating Manual preview
BLM230
Brand: Oriental motor Pages: 4
Orientalmotor K Ⅱ Series Operating Manual preview
K Ⅱ Series
Brand: Orientalmotor Pages: 4
Parker P1V-M Series Installation Leaflet preview
P1V-M Series
Brand: Parker Pages: 12
Parker V14-110 Service Manual preview
V14-110
Brand: Parker Pages: 40

Brands by name

Popular brands

Load more brands