VBrick dme, Admin Manual

Page: 215 / 219

Configuring Devices for the DME
DME Admin Guide 203
5. When done click
OK
and
Finish
and the
H.264 for Flash
option will be added to the
Outputs
menu as a selectable output option.
St re a m t o t h e DM E w it h R M S 1.3
You can use RMS to send an H.264 unicast push or a multicast output stream to the DME.
With both methods you will need to publish the .sdp file to the DME

To configure an RMS stream for a DME:
1. Open RMS and enter a destination address on the Broadcast page. In the
Destination
Address
field (Figure 1) enter a multicast IP address (for example 239.2.127.254) or the
unicast IP address of the DME.
Note : When entering metadata (e.g. Session Info, Origin E-Mail, etc.) be sure to remove
any leading spaces.