VBrick dme Admin Manual Download Page 186

Page: 186 / 219

174

Error Log



To access the DME Error Log:

1. Navigate to

Monitor

Error Log

The Error Log displays status messages as well as errors. It is enabled and rolls over (i.e.
overwrites the file) as configured on the Logging page.

To reset the Error Log manually, scroll to the bottom of the page (if necessary) and click

Reset Error Log

. If problems occur, you can copy and paste the error text from this page and

send to Vbrick Support Services via email. You may also be asked to fetch other log files
available in DME root via FTP.

Field

Description

Success

The .rpm was signed by Vbrick and successfully installed.

Not Signed

The .rpm you tried to install does not have the correctly signed Vbrick key.

Fail

Either the .rpm upgrade has already been installed or is not valid for this
DME.

Summary of Contents for dme




























































































































































































































Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands

VBrick dme, Admin Manual

Search results

Summary of Contents for dme

Reviews:

Related manuals for dme

Brands by name

Popular brands