Vauxhall Astra 2014 Owner'S Manual Download

Page: 194 / 327

Driving and operating

193

Press button

; the current setting is

shown on the Driver Information

Centre. Press button

again to

change the alert sensitivity.

Alerting the driver

When approaching another vehicle

too rapidly, the collision alert warning

page will be indicated in the Driver

Information Centre. Simultaneously a

warning chime sounds. Depress the

brake pedal, if it is required by the

situation.

Deactivation

The system can be deactivated.

Press button

repeatedly until the

following message appears in the

Driver Information Centre.

General information for both

variants of forward collision alert

Warning

Forward collision alert is just a

warning system and does not

apply the brakes. When

approaching a vehicle ahead too

rapidly, it may not provide you

enough time to avoid a collision.
The driver accepts full

responsibility for the appropriate

following distance based on traffic,

weather and visibility conditions.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands