Vauxhall Astra 2014 Owner'S Manual Download

Page: 149 / 327

148

Lighting

Light switch in position AUTO:

switching on front fog lights will switch

headlights on automatically.

Rear fog lights

Operated with the

button.

Light switch in position AUTO:

switching on rear fog light will switch

headlights on automatically.
Light switch in position

: rear fog

light can only be switched on with

front fog lights.
The vehicle rear fog light is

deactivated when towing.

Parking lights

When the vehicle is parked, the

parking lights on one side can be

activated:

1. Switch off ignition.
2. Move turn signal lever all the way

up (right parking lights) or down

(left parking lights).

Confirmed by a signal and the

corresponding turn signal control

indicator.

Reversing lights

The reversing light comes on when

the ignition is on and reverse gear is

selected.

Misted light covers

The inside of the light housing may

mist up briefly in poor, wet and cold

weather conditions, in heavy rain or

after washing. The mist disappears

quickly by itself; to help switch on the

headlights.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands