Vauxhall Astra 2014 Owner'S Manual Download

Page: 273 / 327

272

Vehicle care

3. Place the hook end of the strap

through the loop and pull it until

the strap is fastened securely to

the lashing eye.

4. Insert the strap through the

spokes of the wheel as shown in

the illustration.

5. Mount the hook to the rear lashing

eye.

6. Tighten the strap and secure it

using the buckle.

Danger

Always drive with folded up and

engaged rear seat backrests when

stowing a damaged full size wheel

in the load compartment.

Stowing a damaged full size

wheel in the spare wheel well,

Sports Tourer and 4-door

saloon

Vehicles equipped with a full size

spare wheel:

A damaged full size wheel must be

stowed outside up in the spare wheel

well secured with the wing nut.
The floor cover can be placed on the

projecting wheel.
Vehicles equipped with a temporary

spare wheel:

Secure a damaged full size wheel

outside up with the wing nut in the

spare wheel well after exchanging the

thread bolt by an extension bolt,

placed in the tool bag

256. To

replace the bolt:

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands