Vauxhall Astra 2014 Page 186 Owner'S Manual Download

Page: 186 / 327

Driving and operating

185

Warning

The complete driver attention is

always required while driving with

adaptive cruise control. The driver

stays fully in control of the vehicle

because the brake pedal, the

accelerator pedal and the cancel

switch have priority over any

adaptive cruise control operation.

Switching on

Press button

to switch on adaptive

cruise control. The control indicator

illuminates white.

Activation by setting the speed

Adaptive cruise control can be

activated between 31 mph and

112 mph.
Accelerate to the desired speed and

turn thumb wheel to SET/-, the

current speed is stored and

maintained. Control indicator

illuminates green.

The adaptive cruise control symbol,

the following distance setting and set

speed are indicated in the top line of

the Driver Information Centre.

The accelerator pedal can be

released. Adaptive cruise control

remains activated while gearshifting.

Overriding set speed

It is always possible to drive faster

than the selected set speed by

depressing the accelerator pedal.

When the accelerator pedal is

released, the vehicle returns to the

desired distance if a slower vehicle is

ahead. Otherwise it returns to the

stored speed.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands