Vauxhall Astra 2014 Owner'S Manual Download

Page: 65 / 327

Storage

Rear carrier system

Rear carrier system for two

bicycles

The rear carrier system (Flex-Fix

system) allows bicycles to be

attached to a pull-out carrier

integrated into the vehicle floor. The

transportation of other objects is not

permitted.
The maximum load of the rear carrier

system is 40 kg. The maximum load

per bicycle is 20 kg.

The wheelbase of a bicycle must not

exceed 1.15 metres. Otherwise the

secure fastening of a bicycle is not

possible.
If not in use, the carrier system must

be slid back into the vehicle floor.
There must not be any objects on the

bicycles that could become loose

during transportation.

Caution

Do not attach bicycles with carbon

pedal cranks to bicycle carriers.

The bicycles might get damaged.

Extending

Open the tailgate.

Warning

No-one should be in the extension

zone of the rear carrier system,

risk of injury.

Pull release lever up. The system

disengages and travels quickly out of

the bumper.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands