Vauxhall Astra 2014 Owner'S Manual Download Page 158

Page: 158 / 327

Climate control

157

Each change of settings is shown in

the Info-Display for a few seconds.
The electronic climate control system

is only fully operational when the

engine is running.

Automatic mode AUTO

Basic setting for maximum comfort:

■ Press AUTO button, the air

distribution and fan speed are

regulated automatically.

■ Open all air vents to allow

optimised air distribution in

automatic mode.

■ Press

to switch on optimal

cooling and demisting. Activation is

indicated by the LED in the button.

■ Set the preselected temperatures

for driver and front passenger using

the left and right rotary knob.

Recommended temperature is

22 °C.

The fan speed regulation in automatic

mode can be changed in the menu

Settings.
Vehicle personalisation

132.

Temperature preselection

Set temperatures to the desired

value.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Brands by name

Popular brands