Vauxhall Astra 2014 Owner'S Manual Download

Page: 45 / 327

Seats, restraints

Danger

Move the backrest to an upright

position before folding to avoid

injury.

Seat folding on power seats

Lift release lever and fold backrest

forwards. The seat slides

automatically forwards to the stop.
To restore lift backrest to upright

position and engage. The seat slides

automatically backwards to the

original position.

In case the head restraint of the

folded backrest is blocked by the

upper windscreen frame, slightly let

the seat move backwards before

lifting up the backrest

44.

Safety function

If the power seat encounters

resistance while sliding forward or

rearward, it is immediately stopped

and moved back.

Overload

If the folding function is electrically

overloaded, the power supply is

automatically cut-off for a short time.

Power seat adjustment

Warning

Care must be taken when

operating the power seats. There

is a risk of injury, particularly for

children. Objects could become

trapped.

Keep a close watch on the seats

when adjusting them. Vehicle

passengers should be informed

accordingly.

Seat lengthwise position

Move switch forwards/backwards.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands