Vauxhall Astra 2014 Owner'S Manual Download

Page: 34 / 327

Keys, doors and windows

Automatic anti-dazzle

Dazzle from following vehicles at

night is automatically reduced.

Windows

Windscreen

Heat-reflecting windscreen

The heat-reflecting windscreen has a

coating which reflects solar radiation.

Also data signals, e.g. from toll

stations, might be reflected.

The marked areas on the windscreen

are not covered with the coating.

Devices for electronic data recording

and fee payment must be attached in

these areas. Otherwise data

recording malfunctions may occur.

Windscreen stickers

Do not attach stickers such as toll

road stickers or similar on the

windscreen in the area of the interior

mirror. Otherwise the detection zone

of the sensor and the view area of the

camera in the mirror housing could be

restricted.

Manual windows

The door windows can be opened or

closed with the window winders.

Power windows

Warning

Take care when operating the

power windows. Risk of injury,

particularly to children.
If there are children on the rear

seats, switch on the child safety

system for the power windows.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands