Vauxhall Astra 2014 Owner'S Manual Download

Page: 44 / 327

Seats, restraints

Side bolster, VXR version

Adjust seat width and backrest width

using the switches to suit personal

requirements.
Operate front rocker switch to change

seat width.
Operate rear rocker switch to change

backrest width.

Seat folding

Caution

When seat height is in highest

position, push head restraints

down and lift up sun visors before

folding backrest forwards.

Seat folding on manual

operated seats

Lift release lever and fold backrest

forwards. Slide seat forwards.

To restore, slide the seat backwards.

Move the backrest against the

resistance to the upright position and

engage.
The memory function allows the seat

to engage in its original position.
Do not operate backrest inclination

lever while backrest is tilted forward.
Vehicles with panorama roof: to tilt

backrest forward, push head

restraints down and lift up sun visors.

The illustration shows the release

lever on VXR seat.

Summary of Contents for Astra 2014








































































































































































































































































































































Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands

Vauxhall Astra 2014, Owner'S Manual

Search results

Summary of Contents for Astra 2014

Reviews:

Related manuals for Astra 2014

Brands by name

Popular brands