Locks, doors, windows
20
Note
If the central locking system
3
cannot be
opera ted with the remote c ontrol, this may
be due to the follow ing reasons:
z
The rem ote control is out of range.
z
The battery voltage of the remote
control is too low. Change the battery in
the rem ote control unit.
z
The rem ote control ha s b een op erated
too many times in succession outside the
vehicle’s reception range (e.g. at too
great a distance from the vehicle).
The rem ote control must b e
reprogrammed, we recommend you
consult a workshop .
z
Interference from higher p ow er radio
waves from other sources.
Loc k or unloc k the d oors manually using
the k ey or central locking switch
3
.
Manual locking does not operate the
central locking system. Hav e cause of fault
rem edied by a workshop.
Changing the battery in remote control
unit
Replace the battery in a ccord ance with the
Serv ic e Booklet or when the range of the
remote control starts to become reduced.
Tw o function remote control unit:
Open the ba ttery com partment by
inserting a coin into the slot and twisting.
Ensure the new battery is installed
correctly.
Replace the cover a nd press until it is fully
engaged.
Selective door locking rem ote control unit:
Open the battery compartment by
removing the sc rew on the rear cover, then
inserting a coin into the slot and twisting .
Ensure the new battery is installed
correc tly.
Replace the cover and press until it is fully
eng aged, then replace and secure screw.
Mak e sure that you dispose of old batteries
in accordance with env ironmental
protec tion regulations.
