Vatech A9, User Manual, Page: 127 / 196

12. Maintenance
vatech A9 (Model name: PHT-30CSS) User Manual 127
Englis
h
12. Maintenance
The equipment must be installed and maintained on a flat
surface.
VATECH requires periodic constancy tests to ensure image quality and safety for the
patient and the operator.
Only VATECH -authorized technicians can perform inspection and service for the
equipment. For technical assistance, contact the
VATECH
service center or your local
VATECH representative.
12.1 Regular Maintenance

Always turn off the equipment before performing any
maintenance.

Never remove equipment covers. There are no
repairable parts inside.

The only parts that can be replaced by the user are the
input fuses, which must comply with the manufacturer’s
specifications.

As a precaution against fire, the replacement should be
one in the same type and range.

There are no user-serviceable parts inside this
equipment.

If any service is required, please contact the VATECH
service center or your local VATECH representative.

Do not unplug cables by force.

Do not expose the equipment or components in an area that is susceptible to
water or humidity.

Do not expose the equipment in an area of extreme fluctuation in temperature,
poor ventilation, direct sunlight, dust, salt, etc.

Keep all detachable components well organized and clean.

Make sure that the equipment is well-grounded.

Never try to modify this equipment, including the wires or cables. Doing so may
damage it beyond repair.