Varex Imaging 2530W-G5 Manual Download Page 51

Page: 51 / 112

4343W/4336W-G5/2530W-G5 X-ray Detectors

www.vareximaging.com

11.6

Using a Third-Party Inductive Battery Charger

Any third-party Inductive Battery Charger meeting the

Qi 1.2 standard at 15 watts

may be used

for battery charging outside of the bucky tray. Refer to

Figure 19

for the location of the inductive

charger receiver on the X-ray detector for integrating a third-party Inductive Battery Charger.

WARNING

Third-party Inductive Battery Chargers must not be used in the bucky
tray. Ignoring this warning may result in image artifacts or damage to
the X-ray detector.

Caution

Third-party Inductive Battery Chargers do not support image
acquisition while using the charger.

Note

To support image acquisition while using the charger, the Varex
supplied Inductive Battery Charger must be used, see

Section 11.5

Figure 19 Third-party Inductive Battery Charger 4343W/4336W-G5/2530W-G5 X-ray Detector

Alignment

FE
RE

NCE

ANUAL

Summary of Contents for 2530W-G5

















































































































Search results

Summary of Contents for 2530W-G5

Reviews:

Related manuals for 2530W-G5

Brands by name

Popular brands

Varex Imaging 2530W-G5, Manual

Search results

Summary of Contents for 2530W-G5

Reviews:

Related manuals for 2530W-G5

Brands by name

Popular brands