AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 6: MAINTENANCE
090010-OP_r0
PAGE - 63
6.4 REPLACEMENT PARTS
Replacement parts should be purchased through your
local Vanair representative or where the 300 Series
Power System was purchased. If, for any reason, parts
are not available in this manner, they can be purchased
through Vanair directly.
VANAIR MANUFACTURING, INC.
10896 West 300 N.
Michigan City, IN 46360
Telephone: (800) 526-8817
(219) 879-5100
Service Fax: (219) 879-5335
Parts Fax: (219) 879-5340
Sales Fax: (219) 879-5800
www.vanair.com
6.5 PARTS REPLACEMENT AND
ADJUSTMENT PROCEDURES
NOTE
For assistance when ordering new
replacement parts, consult
Section 9.1,
Parts Ordering Procedure
, and Table 9A:
Recommended Spare Parts List.
NOTE
If additional spare parts are being stored
for future use, make certain that they are
stored in proper containers that allow for
protection against contamination, and
kept in a clean area of moderate
temperature reading. For information on
storing the machine package for periods
of non-use, consult
Section 6.8.2, Long
Term Storage
.
System Component or
Part Group Task
Manual
Section
Location
Parts Replacement and Adjust-
ment Procedures
6.5
page 63
Continued on next page
WARNING
Relieve pressure from the compressor
system before removing any
components. The compressor and
engine oil levels should be checked with
the unit shut down and the oil allowed to
properly settle.
