Vanair Air N Arc All-in-One Power Systems 300, Operations Manual & Parts List

Page: 143 / 204

AIR N ARC
®
300 SERIES ALL-IN-ONE POWER SYSTEM
®
SECTION 9: ILLUSTRATED PARTS LIST
090010-OP_r0 PAGE - 125
9.3 COMPRESSOR AND PARTS ASSEMBLY (CONT.)
ITEM DESCRIPTION PART NUMBER QTY
29 WASHER, LOCK METRIC M8 838808-200 4
30 WASHER, FLAT METRIC M8 838908-180 4
31 CONNECTOR, 37FL/MPT #08 x 1/2 860108-050 2
32 CONNECTOR, 37FL/MPT #12 x 1/2 860112-050 1
33 TENSIONER, AIR END A1269736 1
34 WASHER, SHEAVE COMPRESSOR A1269989 1
35 PIPE, DIPSTICK HOLDER CM269777 1
36 DIPSTICK, OIL LEVEL CM269778 1
37 SHEAVE, DRIVE "K" SECTION 8 GROOVE DR269939 1
38 BELT, SERPENTINE DR270054 1
39 IDLER, 1.375 WIDTH, 3 3/8DIA DR46584 1
40 SWITCH, PRESSURE N.C. 185 PSI EL270002 1
41 WASHER, 5/16ID X 21/32OD, 2 PIECE LOCKING FA21391 1
42 TEE, MALE STREET 1/8 x 1/8 x 1/8 FI31152 1
43 PIPE BRASS, PLUG, COUNTERSUNK 1/8" NPT FI67437 1
44 COMPRESSOR TO OIL COOLER TU270069-001 1
45 COMPRESSOR TO OIL COOLER TU270069-002 1
46 DRAIN HOSE, COMPRESSOR TU270069-003 1
47 COMPRESSOR TO AIR ACCUMULATOR TU270069-004 1
48 TUBE, NK-40 TU270215 1
49 TUBING, 1/4DIA., NYLON, 230 PSI X 1.5 FT TU95945 1
50 TUBING, 1/4DIA., NYLON, 230 PSI X 3 FT TU95945. 1
I
Belt installed prior to idler (consult Section 6.5.12 when performing maintenance on serpentine belt).
II
Heat blanket is optional. Consult Appendix A, Section A.5, Air N Arc 300 Series All-in-One Power
System Available Option List .
III
Case will leak oil when screws are removed. Do not allow cover to move when performing serpentine
belt maintenance
IV
This fitting must have hex clearance; if not this port will leak.