Valloy Incorporation.
Any-002
User Manual
any-002
© 2015 Valloy Inc. All rights reserved.
Rev 1.0
– 2015.10
56 of 68
※ If label is attached to consumables, such as drum, fuser or belt, you can eliminate it using
remover of adhesive. However, in some cases, even though label is eliminated cleanly, it may
affect quality of printing.
Solution for problem ②
a. Press ‘Reset’ button on the right of printer as shown in below picture.
b. If you want to proceed with previous work again, press ‘online’ button and if you want to
cancel, press ‘cancel’ button.
2-1.2 Error code table
Message
Cause
Error
Action to take
POWER OFF/ON
001: Error
Abnormal condition of
the CPU (board or
insufficient supply of
power)
Is the error display
reproduced?
Yes
Yes
Turn the power OFF/ON.
Replace the CU board. (Replace the
EEPROM.)
POWER OFF/ON
002: Error ~
011: Error
Abnormal condition of
the CPU
Is it displayed only on
particular file?
Is the error display
reproduced?
Yes
No
Yes
Check the output file.
Reinstall/replace the ROM or the
RAM
Replace the CU board (including
the EEPROM).
SERVICE CALL
020: Error
CU ROM Hash Check
Error
(GDI Model)
Is the error display
reproduced?
Yes
Turn the power OFF/ON. Replace
the CU board.
SERVICE CALL
020: Error ~
025: Error
CU ROM Hash Check
Error
(PDL Model)
Program ROM installing state
No
Yes
No
Reinstall the program ROM.
Replace the program ROM.
Replace the CU board (including
the EEPROM).
SERVICE CALL
030: Error
CU RAM Check Error
Is the error display
reproduced?
Yes
Turn the power OFF/ON.
Replace the CU board. (Replace the
EEPROM.)
SERVICE CALL
031: Error
CU Option ROM Check
Error
Is the RAM DIMM normally
installed?
No
Yes
Reinstall the RAM DIMM.
Replace the RAM DIMM.
