Valloy Incorporation.
Any-002
User Manual
any-002
© 2015 Valloy Inc. All rights reserved.
Rev 1.0
– 2015.10
35 of 68
3-3.2 Print setting by paper
Kind of media weight
Kind of media
Print setting
Remark
Paper(Art paper, Glossy
paper, Kraft paper, Color
paper etc.)
Labels2 or Glossy
PET, PP(Avery)
Films
PVC(Avery)
Labels2
※Information about supported paper and print setting is limited to that which is verified by Valloy Incorporation.
3-3.3 Printing rule depending on length of image
- In WEB 61, number of images to be printed changes depending on length of image. For
example, in case that length of image is 100mm, it is printed in multiple of 5 according to
above mentioned printing rule. Therefore, even though you input ‘9’ as number of printing, 5
(5x1) images are printed, which is multiple of 5. This is also applied equally to ‘Adjust mode’
which is used at the time of pre-cut media printing. When printing image of 100mm, position
is corrected once every time when sensing occurs 5times.
3-3.4 Caution
- When printing in the mode which does not match paper, quality of printing may be decreased,
i.e. toner is not fused firmly or bending or bubble appears. Therefore, before you input printing,
please check set value certainly that depends on paper to be used.
- Consumables, such as drum or fuser may be damaged if you test paper which is not specified in
manual.
