Valloy Incorporation.
Any-002
User Manual
any-002
© 2015 Valloy Inc. All rights reserved.
Rev 1.0
– 2015.10
47 of 68
sensitive.
Do not touch it and do not expose it to normal room light for more than 5 minutes. If the drum
unit needs to be out of the printer for longer than this, please wrap the cartridge inside black
plastic bag to keep it away from light. Never expose the drum to direct sunlight or very bright
room lighting.
5) With the colored toner release lever (1) to the right, pull the lever towards you.
This will release the bond between the toner cartridge and the image drum unit.
6) Lift the right-hand end of the toner cartridge (1) and then draw the cartridge to the right to
release the left-hand end as shown (2), and withdraw the toner cartridge out of the image drum
cartridge. Please the cartridge on a piece of paper to avoid marking your furniture.
7) Take the new image drum cartridge out of its packaging and place it on the piece of paper
where the old cartridge was placed. Keep it the same way round as the old unit. Pack the old
cartridge inside the packaging material for disposal.
8) Place the toner cartridge onto the new image drum cartridge as shown. Push the left end in
first, and then lower the right end in. (It is not necessary to fit a new toner cartridge at this time
unless the remaining toner level is very low.)
