8-4
Valco Cincinnati, Inc.
Section 8 - Glue Pattern Edit Menu
MC032 - MCP-25 Control
Glue-Pattern-Edit Parameters -
Continued
The repeat factor function will not work
unless a startpoint (delay) is entered for
the pattern that will follow the entered
pattern. (See
“Example of a Standard-
Mode Glue Pattern” in this section.) For
this reason, only up to four identical or
non-identical patterns can be used by
each valve (maximum of 5 in case of no
repetition). The startpoint of the
repetition is the delay after thelast glue
line. Example:
2 glue lines: delay 3 start of repeat,
glue length 3 must be “0”
4 glue lines: delay 5 start of repeat,
glue length 5 must be “0”
9
99
99
Unit of Measure
Unit of Measure
Unit of Measure
Unit of Measure
Unit of Measure
This field indicates the unit of measure (millimeters or inches)
that has been selected in the setup menu. (See
Section 11—
Setup Menu for information about how to change the unit of
measure.)
10
10
10
10
10 Scanner Lockout
Scanner Lockout
Scanner Lockout
Scanner Lockout
Scanner Lockout
This field contains the lockout length of the scanner signal. The
scanner signal is not accepted once a lockout length has been
entered. This function can be used to bypass cutouts on the
product. The entered lockout length should be 10 mm (0010) or
1/2 inch (00.50) longer than the product cutout. Maximum
allowable lockout length is 19999mm or 199.99 inches.
11
11
11
11
11 F1
F1
F1
F1
F1
Pressing F1 (DELETE) deletes the glue-pattern information for
this channel (valve). (See “Deleting a Glue Pattern” in this
section.)
12
12
12
12
12 F2
F2
F2
F2
F2
Pressing F2 (COPY) copies the glue pattern information for this
valve to another valve. (See “Copying a Glue Pattern” in this
section.)
13
13
13
13
13 F3
F3
F3
F3
F3
Pressing F3 (FORWARD) displays edit screen of next valve (see
item 4.) Up to 8 valves are available in 1 job.
14
14
14
14
14 F4
F4
F4
F4
F4
Pressing F4 (BACK) displays the edit screen of the previous
valve (see item 4.) Up to 8 valves are available in 1 job.
