7-10
Valco Cincinnati, Inc.
Section 7 - Job Management Menu
MC032 - MCP-25 Control
To edit a job in memory, follow these steps:
1.
Using the arrow keys, select the desired job from the on-screen
list.
2.
Press F2 (CHANGE). The glue-pattern-edit menu displays.
The glue-pattern-edit menu that
appears depends on which mode is
selected in the setup menu (see
Section 11—Setup Menu for detailed
information). To select a new mode,
see
Section 8—Glue-Pattern-Edit Menu,
Selecting a Mode.
F2
Editing a Job
in Memory
3.
Using the arrow keys, move the cursor to the desired field.
4.
Using either the scroll buttons or the numeric keypad, enter the
new value.
You press F2 (PRESS.) (page 1) to
change the glue-pressure values, F2
(DELETE) (page 2) to delete glue-
pattern data, and F3 (COPY) (page 2)
to copy glue-pattern data to another
channel. (See
Section 8—Glue-Pattern-
Edit Menu and Section 9—Glue-
Pressure-Edit Menu for descriptions of
the parameters.)
5.
Press F1 (END) when you have finished editing a job in memory.
The job-management menu displays.
Steps 1 and 2—Job-Management Menu
Steps 3, 4, and 5—Glue-Pattern-Edit Menu
