Vaidnor VDF650 Series, User Manual

Page: 184 / 296

VDF650 User Manual Desc
ription of Function Codes
-
183
-
Group P7
:
Operation Panel and Display
Function Code Parameter Name Setting Range Default
P7
-
01
MF
.
K Key function
selection
0
:
MF
.
K key disabled
1
:
Switchover between operation panel
control and remote command control
(
terminal or communication
)
2
:
Switchover between forward rotation
and reverse rotation
3
:
Forward JOG
4
:
Reverse JOG
0
MF
.
K key refers to multifunctional key
.
You can set the function of the MF
.
K key by using this
parameter
.
You can perform switchover by using this key both in stop or running state
.
• 0
:
MF
.
K key disabled
This key is disabled
.
• 1
:
Switchover between operation panel control and remote command control
(
terminal
or communication
)
You can perform switchover from the current command source to the operation panel
control
(
local operation
).
If the current command source is operation panel control
,
this
key is invalid
.
• 2
:
Switchover between forward rotation and reverse rotation
You can change the direction of the frequency reference by using the MF
.
K key
.
It is
valid only when the current command source is operation panel control
.
• 3
:
Forward JOG
You can perform forward JOG
(
FJOG
)
by using the MF
.
K key
.
• 4
:
Reverse JOG
You can perform reverse JOG
(
FJOG
)
by using the MF
.
K key
.
Function Code Parameter Name Setting Range Default
P7
-
02
STOP
/
RESET key
function
0
:
STOP
/
RESET key enabled only in
operation panel control
1
:
STOP
/
RESET key enabled in any
operation mode
1