vacuubrand RE 2.5 Page 7 Instructions For Use Manual Download

Page: 7 / 80

20901559_EN_RE_RZ_V7_230523

Introduction

1.2.2

1.2.2 Display conventions

Display conventions

Warning levels

DANGER

Indicates an imminent hazardous situation.

Disregarding the situation could result in extremely

serious injury or death.

Take appropriate action to avoid dangerous

situations!

WARNING

Warns of a potentially hazardous situation.

Disregarding the situation could result in serious injury

or death.

Take appropriate action to avoid dangerous

situations!

CAUTION

Indicates a potentially hazardous situation.

Disregarding the situation could result in minor injury or

damage to property.

Take appropriate action to avoid dangerous

situations!

NOTE

Indicates a potentially harmful situation.

Disregarding the situation could result in damage to property.

Additional notes

Information or specific recommendation which must be

observed.

Important information for trouble‑free operation of your product.

Helpful tips + tricks

Additional information

Presentation

conventions

IMPORTANT!

Summary of Contents for RE 2.5

















































































Search results

Summary of Contents for RE 2.5

Reviews:

Related manuals for RE 2.5

Brands by name

Popular brands

vacuubrand RE 2.5, Instructions For Use Manual

Search results

Summary of Contents for RE 2.5

Reviews:

Related manuals for RE 2.5

Brands by name

Popular brands