vacuubrand RE 2.5, Instructions For Use Manual, Page: 33 / 80

33 20901559_EN_RE_RZ_V7_230523
Installation and connection
Set up the vacuum pump
5 cm 5 cm
5 cm
>
Place the vacuum pump on a stable, non‑vibrating, level
surface.
>
When installing in lab furniture, maintain a minimum dis ‑
tance of 5 cm (2 in) to adjacent objects or surfaces.
>
The product must be positioned so that the on/off switch
and the power plug can be reached and are accessible. For
this purpose a minimum distance of 12 cm (5 in) to adjacent
objects or surfaces must be kept at one side of the pump.
The on/off switch is at the rear of the terminal box.
>
Prevent heat accumulation and ensure sufficient air
circulation, especially in closed housings.
Observe limitation of use
Limitation of use
(US)
Operating ambient temperature 12 – 40 °C 54 – 104 °F
Max. altitude 2000 m
above sea level
6500 ft
above sea level
Minimum distance to
adjacent parts
5 cm (12 cm) 2 in (5 in)
Relative humidity 30 – 85 %, non‑condensing
Pollution degree 2
Protection class IP 40 type 1
Prevent condensation or external contamination from dust, liquids, and
corrosive gases.

Example
Sketch of
minimum distances
in lab furniture
IMPORTANT!