vacuubrand RE 2.5 Instructions For Use Manual Download Page 68

Page: 68 / 80

20901559_EN_RE_RZ_V7_230523

Appendix

Sources of supply

Purchase original accessories and original spare parts from

a subsidiary of

VACUUBRAND GMBH + CO KG

or your local

distributor or from the

VACUUBRAND Online‑Shop

Information about our complete product range is available

in the current

product catalog

Your local distributor or VACUUBRAND GMBH + CO KG

sales office

is available to assist you with orders, questions

on vacuum control and optimal accessories.

Service

Take advantage of the comprehensive range of services

available from VACUUBRAND GMBH + CO K

VACUUBRAND GMBH + CO K

Services in detail

product consultation and practical solutions

fast delivery of spare parts and accessories

professional maintenance

immediate repairs processing

on‑site service (on request)

with

Health and Safety Clearance

: return, disposal

Visit our website for further information

www.vacuubrand.

com

Service handling

Follow these headings: VACUUBRAND > Support >

Service

Reduce downtime, speed up processing. Please have the

required data and documents at hand when contacting our

Service Department.

Your order can be quickly and easily processed.

Hazards can be prevented.

A brief description and/or photos will help locate the

source of the error.

Meet

Service offer and

service range

Summary of Contents for RE 2.5

















































































Search results

Summary of Contents for RE 2.5

Reviews:

vacuubrand RE 2.5, Instructions For Use Manual, Page: 68 / 80

Search results

Summary of Contents for RE 2.5

Reviews: