manualshive.com logo in svg

Vacon 100 flow, Applications Manual, Page: 47 / 386

Share
Download
Vacon 100 flow Applications Manual Download Page 47

** = For the DIP switch configurations in Vacon VACON

®

 X, see the VACON

®

 100 X Installation

manual.

A

B

C

Fig. 17: The DIP switch
A. Digital inputs

B. Float

C. Connected to GND (default)

Each drive has a pressure sensor. When the redundancy level is high, the drive and the

pressure sensors are redundant.

•

If there is a drive failure, the next drive starts to operate as master.

•

If there is a sensor failure, the next drive (that has a separate sensor) starts to operate

as master.

An individual switch that has an auto, off and man setting controls each drive.

QUICK STARTUP GUIDE 

VACON · 47

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

1 

Summary of Contents for 100 flow



































































































































































































































































































































































































Reviews:

No comments