manualshive.com logo in svg

Vacon 100 flow, Applications Manual, Page: 31 / 386

Share
Download
Vacon 100 flow Applications Manual Download Page 31

PT

Start / Stop

Fig. 8: Multi-pump (single drive) configuration

Autochange function (change of start order) makes the wear of the motors in the system

more equal. Autochange function monitors the running hours and sets the start order of

each motor. The motor that has the lowest running hours starts first and the motor that has

the highest running hours starts last. You can configure the autochange to start based on the

autochange interval time set by the internal real time clock (an RTC battery needed) of the

drive.

You can configure the autochange for all the motors in the system or only the auxiliary

motors.

QUICK STARTUP GUIDE 

VACON · 31

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

1 

Summary of Contents for 100 flow



































































































































































































































































































































































































Reviews:

No comments