manualshive.com logo in svg

Vacon 100 flow, Applications Manual, Page: 123 / 386

Share
Download
Vacon 100 flow Applications Manual Download Page 123

4.1.9

EXTERNAL PID CONTROLLER MONITORING

Table 22: Monitoring of the values of the external PID controller

Index

Monitoring value

Unit

Scale

ID

Description

V2.9.1

ExtPID Setpoint

Varies

As set in

P3.14.1.1

0 (See

5.14 

Group 

3.14: 

External 

PID con-

troller)

83

V2.9.2

ExtPID Feedback

Varies

As set in

P3.14.1.1

0

84

V2.9.3

ExtPID Error

Varies

As set in

P3.14.1.1

0

85

V2.9.4

ExtPID Output

%

0.01

86

V2.9.5

ExtPID Status

1

87

0=Stopped

1=Running

2=In dead band (see 5.14 Group 3.14: External 

PID controller)

4.1.10

MULTI-PUMP MONITORING

You can use the monitoring values from Pump 2 Running Time to Pump 8 Running Time in

the Multi-pump (single drive) mode.

If you use Multimaster or Multifollower mode, read the value of the pump runtime counter

from the monitoring value Pump (1) Running Time. Read the pump runtime from each drive.

MONITORING MENU 

VACON · 123

LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/

4 

Summary of Contents for 100 flow



































































































































































































































































































































































































Reviews:

No comments