Utax P-4030 MFP, Service Manual

Page: 168 / 488

2NM/2NX/2NY/2NZ/2P0/2P6
1-4-3
List of JAM Code
Code Contents Conditions
Jam
location*
0000
Initial jam The power is turned on when a sensor in the con-
veying system is on. -
0100
Secondary feeding timeout Secondary paper feed request given by the con-
troller is unreachable. H
0101
Wait for ready of print-process
package Process package won’t become ready. H
0104
Wait for ready of conveying
package Conveying package won’t become ready. H
0105
Driving prevention A drive does not stop. H
0106
Paper feeding request for
duplex printing time out Paper feeding request for duplex printing given by
the controller is unreachable. I
0107
Wait for ready of fuser pack-
age Fuser package won’t become ready. H
0110
Rear cover open The rear cover is opened during printing. -
0111
Top cover open The top cover is opened during printing. -
0120
Receiving a duplex paper
feeding request while paper is
empty Paper feed request was received from the duplex
section despite the absence of paper in the
duplex section. I
0121
Exceeding number of duplex
pages circulated The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains. I
0501
No paper feed jam The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
cassette 1. 1
0502
PF feed sensor 1 (PFFS1) does not turn on dur-
ing paper feed from cassette 2. 2
0503
PF feed sensor 2 (PFFS2) does not turn on dur-
ing paper feed from cassette 3. 3
0504
PF feed sensor 3 (PFFS3) does not turn on dur-
ing paper feed from cassette 4. 4
0505
PF feed sensor 4 (PFFS4) does not turn on dur-
ing paper feed from cassette 5. 5
0508
The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
duplex section. I
0509
The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
MP tray. B