Utax Faxsystem, Instruction Handbook Manual

Page: 16 / 200

Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-4
(8) “Dest. check” key Press this key when you have entered multiple destination fax numbers using speed-dial keys, etc., and
you want to check the list of those numbers.
(9) “Re-dial” key Press this key when you want to have the fax automatically redial the most recently dialed number.
(10) “On-hook” key When a separately purchased telephone is connected to this fax machine and you press this key, you can
dial a destination number without having to pick up the receiver.
(11) “Memory TX” / “Dir. Feed
Tx” key
When you want to switch between the Memory Transmission mode (“Memory Tx”) and the Direct Feed
Transmission mode (“Dir. Feed Tx”). The mode will change each time you press this key.
(12) Reception mode select
key
Press this key when you want to select a different reception mode. The display will change to the
reception mode selection screen where you can select the desired reception mode by pressing the “Auto
RX”, “Manual RX” or “Answering Machine” key, as appropriate.
(13) Memory bar Indicates the amount of data stored in memory. As documents are being stored, the bar will move
towards “100%” indicating that the data stored in memory is increasing. Once it reaches “100%”, no more
documents can be stored in memory.
(8)
(9)
(10)
(11)
(12)
(13)
(8)
(9)
(10)
(11)
(12)
(13)
Inch
Metric