manualshive.com logo in svg

Utax Faxsystem, Instruction Handbook Manual

The Utax Faxsystem Instruction Handbook Manual is a comprehensive guide that provides detailed instructions and valuable insights on using this innovative fax system. This manual is available for free download on manualshive.com, ensuring easy accessibility and enhanced user experience.

Share
Download
background image

viii

Important! Please read it first.

This Operation Guide contains information on using the facsimile 
functions of this machine. BE SURE to read the Operation Guide 
for your copier as well and maintain both guides in good condition 
in a location close to the machine.
During use, refer to the Operation Guide for your copier for 
information regarding the sections listed at right.

INSTALLATION PRECAUTIONS

„

 Environment

• Avoid installing this product in locations where the top or upper 

rear portion of the unit will be exposed to direct sunlight. Such 
conditions might adversely effect the unit’s ability to detect the 
correct size of originals and documents. When such a location 
cannot be avoided, change the direction the unit is facing in order 
to eliminate exposure to direct sunlight.

„

 Power supply/Grounding the product

• DO NOT connect this product to the same outlet as an air 

conditioner or copier, etc.

PRECAUTIONS FOR USE

CAUTION

• DO NOT leave the Document Processor open as 

there is a danger of personal injury................................. 

Other precautions 

• DO NOT open the front cover or left cover, turn off the power 

switchpower switch, or pull out the power plug while 
transmitting, receiving, or copying.

• This product may only be used within the country of purchase 

due to the different safety and communication standards in each 
country. (International communication standards, however, 
make the communication between countries possible.)

• This product may be inoperable in areas with poor telephone 

lines or communication conditions.

• “CALL WAITING” or other telephone company optional services 

that produce audible tones or clicks on the line can disrupt or 
cause termination of facsimile communications.

• No matter what the status of the unit, if the sound of the motor 

within the unit is audible, never open either the front cover or 
the left cover, nor turn off the power switch.

• Return used battery to point of sales.

Caution Labels

INSTALLATION PRECAUTIONS

PRECAUTIONS FOR USE

How to load paper
Replacing the toner cartridge and waste toner tank
When paper misfeeds
Troubleshooting
Cleaning the copier

Summary of Contents for Faxsystem









































































































































































































Reviews:

No comments

Related manuals for Faxsystem

Baby Lock Quilter's Choice BLQC2 Quick Reference Manual preview
Quilter's Choice BLQC2
Brand: Baby Lock Pages: 20
Baby Lock Ellisimo BLSO Instruction And Reference Manual preview
Ellisimo BLSO
Brand: Baby Lock Pages: 364
Jack JK-58420J Manual Book & Parts Book preview
JK-58420J
Brand: Jack Pages: 23
MyBinding Akiles WBM-532 Instruction Manual preview
Akiles WBM-532
Brand: MyBinding Pages: 3
JUKI MO-2800 Instruction Manual preview
MO-2800
Brand: JUKI Pages: 40
Lumina ESM008 Operating Instructions Manual preview
ESM008
Brand: Lumina Pages: 40
Oki OF4580 User Manual preview
OF4580
Brand: Oki Pages: 91
Brother DH4-B980 Instruction Manual preview
DH4-B980
Brand: Brother Pages: 66
Brother EF4-B641 Parts Manual preview
EF4-B641
Brand: Brother Pages: 56
Brother DB2-B797 Specifications preview
DB2-B797
Brand: Brother Pages: 2
Brother DB2-B797 Instruction Manual preview
DB2-B797
Brand: Brother Pages: 28
Brother DB2-B773-003 Service Manual preview
DB2-B773-003
Brand: Brother Pages: 67
Brother DB2-B773 Specifications preview
DB2-B773
Brand: Brother Pages: 21
Brother Duetta 2 4750D Quick Reference Manual preview
Duetta 2 4750D
Brand: Brother Pages: 48
Brother DB2-B773 Parts Manual preview
DB2-B773
Brand: Brother Pages: 84
Brother E-100M Operation Manual preview
E-100M
Brand: Brother Pages: 66
Brother DH4-B981 Instruction Manual preview
DH4-B981
Brand: Brother Pages: 80
Brother DB2-B201 Parts Manual preview
DB2-B201
Brand: Brother Pages: 58

Brands by name

Popular brands

Load more brands