Section 2 Fax Operation (Basic Use)
2-9
You can cancel a communication even if it is already in progress. The methods for canceling a communication differ depending on whether that
communication is a fax transmission or a fax reception, and whether that transmission was initiated using the Memory Transmission mode or
the Direct Feed Transmission mode. The following contains explanations on the various methods used for canceling communications.
Canceling a Memory Transmission
(during scanning)
If you want to cancel a Memory Transmission during scanning of
the documents, simply press the Stop/Clear key. The document
that is currently being scanned will be ejected and the touch panel
will return to the initial mode settings. If there are any documents
left in the Document Processor, remove them from the document
table.
Canceling a Memory Transmission
(during transmission)
If you want to cancel a Memory Transmission in which scanning all
of the documents has been completed and the dialing or
transmission operation has already begun, perform the following
procedure.
Press the “Status” [“Act status”] key in the bottom right of
the touch panel.
The status of the communication currently in progress
will appear in the message display.
(inch)
(metric)
Press the “Stop” key. The touch panel will return to the
initial mode settings.
* If you attempt to cancel a transmission that is
scheduled to multiple destinations (such as a Broadcast
Transmission) and there were destinations still
remaining to be transmitted to, a message will appear
in the message display asking whether or not you want
to continue the transmissions to the remaining
destinations.
(inch)
(metric)
Canceling a Communication
1
2
Summary of Contents for Faxsystem
