Section 2 Fax Operation (Basic Use)
2-10
Canceling a Direct Feed Transmission
A message such as that shown below will be displayed after dialing
the destination party in the Direct Feed Transmission mode.
If you want to cancel a Direct Feed Transmission, press the “Stop”
key or press the Stop/Clear key. The document that is currently
being scanned will be ejected and the touch panel will return to the
initial mode settings. If there are any documents left in the
Document Processor, remove them from the Document Processor.
(inch)
(metric)
Canceling a Reception
If you want to cancel a reception, perform the following procedure.
Press the “Status” [“Act status”] key in the bottom right of
the touch panel.
The status of the communication currently in progress
will appear in the message display.
(inch)
(metric)
Press the “Stop” key. The touch panel will return to the
initial mode settings.
* If you attempt to cancel a reception that is scheduled
from multiple transmitting faxes (such as a Polling
Reception) and there were fax machines still remaining
to be received from, a message will appear in the
message display asking whether or not you want to
continue the receptions from the remaining faxes.
(inch)
(metric)
1
2
Summary of Contents for Faxsystem
