manualshive.com logo in svg

Utax Faxsystem, Instruction Handbook Manual

The Utax Faxsystem Instruction Handbook Manual is a comprehensive guide that provides detailed instructions and valuable insights on using this innovative fax system. This manual is available for free download on manualshive.com, ensuring easy accessibility and enhanced user experience.

Share
Download
background image

Section 5  Other Features of this Fax

5-8

Polling refers to the method of communication whereby transmission is not initiated by the transmitting party, but is requested and initiated 
at the convenience of the receiving party.
There are two types of polling procedures available in this fax: Polling Transmission and Polling Reception.
*  Since the polling operation is initiated by a call from the receiving party, telephone charges will be billed to the receiving party.

Preparing Documents for a Polling 
Transmission

The documents to be transmitted using the Polling Transmission 
procedure are first scanned into memory and then, when a polling 
request comes from the receiving party, those documents are 
transmitted automatically to that party.
*  During a Polling Transmission, documents will be transmitted 

using the Memory Transmission mode even if the fax is currently 
in the Direct Feed Transmission mode.

*  It is possible to add documents to the Polling Transmission as 

long as you are still waiting for the polling request.

*  If you use Polling Transmission in combination with the Bulletin 

Board function, the same documents can be made available and 
transmitted to an unlimited number of receiving parties. (Refer 
to “Turning the Bulletin Board ON/OFF (Bulletin Board setting)” 
on page 7-3.)

*  If you want to cancel the procedure part way through, press the 

Reset key. The touch panel will return to the initial mode 
settings.

Set the documents you want to transmit.
* When the documents are set on the platen, it is 

necessary, after each page is scanned, to select whether 
or not you want to transmit more pages. (Refer to page 
2-6.)

Press the “Application” key. The Application screen will 
appear.

(inch)

(metric)

Press the “TX Polling” key.
If you are entering documents for this Polling 
Transmission for the first time, go to the next step.
If you want to add documents to those which have already 
been saved into memory or replace them completely, go 
directly to step 6.

(inch)

(metric)

> Entering documents for the first time

If you want to limit who can request transmission of the 
documents from your fax, use the keypad to enter a 
4-digit Polling ID (the self-station ID of the receiving fax).
* If you DO NOT want to designate any specific fax, do 

not enter a Polling ID here.

* If a Polling ID other than “0000” is entered, the 

receiving fax must be one of our models that has the 
corresponding capabilities.

(inch)

(metric)

Press the “Confirm” key and then go directly to step 8.

Allowing the Receiving Party to Initiate Reception  (Polling Communication)

1

2

3

4

5

Summary of Contents for Faxsystem









































































































































































































Reviews:

No comments

Related manuals for Faxsystem

U.S. BLIND STITCH 1118 Series Maintenance & Parts Catalog preview
1118 Series
Brand: U.S. BLIND STITCH Pages: 32
XPower F-16B Owner'S Manual preview
F-16B
Brand: XPower Pages: 12
Singer M3220 User Manual preview
M3220
Brand: Singer Pages: 99
Strobel KA-ED Operating And Mechanic'S Instructions preview
KA-ED
Brand: Strobel Pages: 78
Magnum MC-35M Product Instruction Manual preview
MC-35M
Brand: Magnum Pages: 11
Duerkopp Adler N291 Spare Parts preview
N291
Brand: Duerkopp Adler Pages: 95
Bernina Funlock 009DCC Instruction Manual preview
Funlock 009DCC
Brand: Bernina Pages: 39
National HYDRAULIC PANTHER 6280 Instruction Manual preview
HYDRAULIC PANTHER 6280
Brand: National Pages: 57
Mitsubishi LS2-190 Technical Information preview
LS2-190
Brand: Mitsubishi Pages: 32
Singer 2700 Series Service Manual preview
2700 Series
Brand: Singer Pages: 67
JUKI ASN-690 Instruction Manual preview
ASN-690
Brand: JUKI Pages: 50
Philips RI9355/01 Specifications preview
RI9355/01
Brand: Philips Pages: 2
Philips HD8427/01 Manual preview
HD8427/01
Brand: Philips Pages: 3
Philips Gaggia RI8154/80 Specifications preview
Gaggia RI8154/80
Brand: Philips Pages: 3
Philips HD8327/09 Specifications preview
HD8327/09
Brand: Philips Pages: 3
Panasonic KX-TCM418AL Quick Manual preview
KX-TCM418AL
Brand: Panasonic Pages: 6
Panasonic KX-TCM940DW User Manual preview
KX-TCM940DW
Brand: Panasonic Pages: 56
Panasonic KX-TCM939B User Manual preview
KX-TCM939B
Brand: Panasonic Pages: 56

Brands by name

Popular brands

Load more brands