manualshive.com logo in svg

Utax Faxsystem, Instruction Handbook Manual

The Utax Faxsystem Instruction Handbook Manual is a comprehensive guide that provides detailed instructions and valuable insights on using this innovative fax system. This manual is available for free download on manualshive.com, ensuring easy accessibility and enhanced user experience.

Share
Download
background image

Section 3  Fax Operation (Various Functions)

3-7

Interrupt Transmission lets you send your documents before others, eliminating the 
need to wait until all communications are complete whenever the fax is currently 
scheduled for multiple communications (Broadcast Transmission or Polling Reception, 
etc.), or there are other communications already scheduled in memory ahead of yours.
*  Interrupt Transmission may only be accomplished to a single destination.
*  A maximum of 50 communications (including any combination of Interrupt 

Transmissions, communications that use the timer and Standby Transmissions) can 
be scheduled at one time.

*  Depending on the timing of when you perform the Interrupt Transmission 

procedure, there are occasions where your documents may not be send “immediately” 
after the current communication.

*  If you want to cancel an Interrupt Transmission, simply remove the set documents.
*  To cancel an Interrupt Transmission while it is still waiting to start, perform the 

same procedure as in “<Canceling a waiting transmission in the Direct Feed 
Transmission mode...>” on page 3-4.

*  If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.

Press the “Memory TX” key until it changes to “Dir. Feed 
Tx”.

(inch)

(metric)

Set the documents you want to transmit in the Document 
Processor or on the platen.
* When the documents are set on the platen, it is 

necessary, after each page is scanned, to select whether 
or not you want to transmit more pages and to select the 
size of each page. 
(Refer to page 2-6.)

Enter the destination fax number.
* You can enter the fax number using the keypad, 

abbreviated numbers, one-touch keys or the directory. 
Chain dial keys can be used as well.

Press the Start key. The documents will remain in the 
Document Processor or on the platen, without being 
scanned, waiting for the transmitting 
operation to begin.
Once the operation currently in progress is completed, the 
transmission operation for your documents will begin 
automatically.

Sending Important Documents Before Others  (Interrupt Transmission)

1

2

3

4

Summary of Contents for Faxsystem









































































































































































































Reviews:

No comments

Related manuals for Faxsystem

Singer 138W101 Instructions For Using And Adjusting preview
138W101
Brand: Singer Pages: 12
Titan DK 2500 Operator'S Manual preview
DK 2500
Brand: Titan Pages: 33
JUKI MF-7700 Series Engineer'S Manual preview
MF-7700 Series
Brand: JUKI Pages: 75
Truvox International Orbis 200 Original Instructions Manual preview
Orbis 200
Brand: Truvox International Pages: 15
Babolat Sensor Mono Manual preview
Sensor Mono
Brand: Babolat Pages: 28
Count KF-200 Manual preview
KF-200
Brand: Count Pages: 27
Radio Shack TAD-704 Owner'S Manual preview
TAD-704
Brand: Radio Shack Pages: 28
Garden Gear G0518 Instruction Manual preview
G0518
Brand: Garden Gear Pages: 16
ISM SV-520 Instruction Manual preview
SV-520
Brand: ISM Pages: 33
JUKI DLN-9010 Instruction Manual preview
DLN-9010
Brand: JUKI Pages: 100
JUKI dsu-142 Instruction Manual preview
dsu-142
Brand: JUKI Pages: 56
Hotpoint WMEF 762 Instructions For Use Manual preview
WMEF 762
Brand: Hotpoint Pages: 16
Brother 885-E42 Operation Manual preview
885-E42
Brand: Brother Pages: 120
Brother 885-S25 Operation Manual preview
885-S25
Brand: Brother Pages: 81
Brother 885-S33 (French) Manuel D'Instructions preview
885-S33
Brand: Brother Pages: 66
Brother 885-S61 Operation Manual preview
885-S61
Brand: Brother Pages: 156
Brother 083-8775 Instruction Manual preview
083-8775
Brand: Brother Pages: 135
Brother 882-D83 Operation Manual preview
882-D83
Brand: Brother Pages: 180

Brands by name

Popular brands

Load more brands