Utax CD 1325, Instruction Handbook Manual

Page: 88 / 311

Sending Functions
2-14 ADVANCED OPERATION GUIDE
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
NOTE:
When the color mode in scanning has been selected for
Grayscale or Full Color, you can adjust the image quality Regarding color
mode, refer to
Color / Grayscale / Monochrome Selection on page 2-25 .
When the optional PDF upgrade kit has been installed, you can use PDF
encryption functions. For details, refer to the following
PDF Encryption
Functions .
Use the procedure below to select the file format for transmission.
1
Place the originals on the platen.
2
Press the Send key.
3
Press [Type of Original/Transmission] and then [File Format].
4
Select the file format from [PDF], [TIFF], [JPEG], and [High Comp. PDF].
When the color
mode in scanning
has been selected
for Grayscale or Full
Color, set the image
quality.
If the optional PDF
upgrade kit is
installed, press
[Encryption] and
specify the
encryption settings.
File Format
Adjustable range of image
quality
Color mode
PDF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale,
Monochrome
TIFF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale,
Monochrome
JPEG 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.) Full Color, Grayscale
High Comp.
PDF *
* Only displayed when the optional PDF Upgrade Kit is installed.
1 Compression Ratio Priority
to 3 Quality Priority Full Color
Status 10/10/2007 10:10
Place original .
Cancel OK Add Shortcut
Ready to send.
Press [OK] to display
Image Quality
File Format
Destination
Encryption
Low Quality
1
the image.
(High Comp.)
High Quality
(Low Comp.)
Off
TIFF
PDF
JPEG
High Comp.
PDF