Utax CD 1325 Instruction Handbook Manual Download Page 165

Page: 165 / 311

Status / Job Cancel

ADVANCED OPERATION GUIDE

5-17

Device/Communication

Configure the devices/lines installed or connected to this machine or check
their status. You can also control devices depending on their status.

Displaying Device/Communication Screen

The procedure for using the Device/Communication screen is explained
below.

Press the

Status/Job Cancel

key.

Press [Device/Communication]

The screen to check the status or configure the devices is displayed.

Check of Device Status

The items you can check are described below.

Scanner

The status of an original scanning in the document processor (optional) or
the error information (paper jam, opened cover, etc.) is displayed.

Printer

Error information such as paper jam, out of toner, or out of paper, and
status such as waiting or printing are displayed.

Hard Disk

The information such as formatting, overwriting for erasure, and error
occurrence is displayed.

FAX Backup Memory

Usage and capacity of the optional data backup kit are displayed.

Detail

Scanner

Printer

Removable Memory

Hard Disk

FAX Backup Memory

Memory Card

Ready .

Safely removable.

Error has occurred.

Not connected.

Format

Remove

Display

Error

Format

Printing list

Printing Jobs

Sending Jobs

Storing Jobs

Device/

Communication

Paper / Supplies

Log

Executing TX job **.

10/10/2007 10:10

Summary of Contents for CD 1325
























































































































































































































































































































Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands

Utax CD 1325, Instruction Handbook Manual

Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands