Utax CD 1325 Instruction Handbook Manual Download Page 104

Page: 104 / 311

Sending Functions

2-30

ADVANCED OPERATION GUIDE

Enter Document Name/File Name

This setting allows you to assign a document name to scanned images.
You can specify a default for the document name.

Use the procedure below to assign names to scanned documents that you
are sending.

Place the originals on the platen.

Press the

Send

key.

Press [Advanced Setup] and then [File Name Entry].

Press [File Name].

Enter the document name, and press [OK].

NOTE:

Up to 30 characters can be entered for the document name.

Press [Job No.] to enter the job No., and [Date and Time] to enter the date
and time.

Press [OK].

Specify the destination, and press the

Start

key to start sending.

Status

10/10/2007 10:10

Enter Destination.

Cancel

Add Shortcut

Ready to send.

Add a file name.

Additional information such as [Job No.]
and [Date and Time] can also be set.

File Name Entry

Destination

File Name

doc

Additional Info.

Job No.

Date and Time

& [Date and Time ]

Summary of Contents for CD 1325
























































































































































































































































































































Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands

Utax CD 1325, Instruction Handbook Manual

Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands