Utax CD 1325 Instruction Handbook Manual Download Page 146

Page: 146 / 311

Using Document Box

4-28

ADVANCED OPERATION GUIDE

Select the document
to print and press
[Print].

If the document is protected by a password, enter the password using the
numeric keys.

Press [Start Print] to start printing.

The Repeat Copy Box job will be erased when the main power switch is
turned off.

Image Overlay Form (Copy) Box

Storing a Form

You can store forms to be used for image overlay (copy) in the Image
Overlay Form (Copy) box. You can store a 1-page form.

Use the procedure below.

Place the original in the
document processor or on the
platen.

NOTE:

Refer to the

Operation Guide

for details.

Press the

Document Box

key and [Job Box].

Job Box

Name

Date and Time

Size

2007060600531002

06/06/2007 10 :10

001/001

Detail

Status

10/10/2007 10:10

Delete

Repeat Copy

Summary of Contents for CD 1325
























































































































































































































































































































Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands

Utax CD 1325, Instruction Handbook Manual

Search results

Summary of Contents for CD 1325

Reviews:

Brands by name

Popular brands