manualshive.com logo in svg

Uson SPRINT LC, Owner'S Manual

Share
Download
Uson SPRINT LC Owner'S Manual Download Page 75

Page 75 

(TRM) Test Result Monitoring Software 

 
Uson’s Test Result Monitoring and Reporting software is a powerful tool 
for Sprint LC users. It has been specifically designed for use with the 
Sprint LC and Uson’s other test equipment. TRM’s reports, graphs and 
monitoring features make it possible to improve both product quality and 
the manufacturing process. The many included reports can be filtered and 
customized to fit most every need. 
 
This is the simplest and most powerful way to collect data from the Sprint 
LC. It can accept inputs from multiple testers and configure the data into 
real-time, easy to read graphs and reports. 
 

 

 
 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

By Day

X Bar / R Chart

7.00

7.50

8.00

8.50

9.00

9.50

10.00

10.50

11.00

1

2

3

4

5

6

7

8

9

10

0.0

0.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

X Bar
CL X Bar
UCL
LCL
Range
CL
UCL
LCL

Summary of Contents for SPRINT LC

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands