manualshive.com logo in svg

Uson SPRINT LC, Owner'S Manual

The Uson SPRINT LC Owner's Manual is a comprehensive guide that provides detailed instructions on using and optimizing your Uson SPRINT LC product. Download this manual for free from our website and enhance your experience with this innovative device. Explore the possibilities with our user-friendly manual, now available for download at manualshive.com.

Share
Download
background image

Appendix K 

Real Time Clock 

The Sprint LC tester described in this Appendix has an option to add a 
time stamp to the serial port output. The real time clock option adds a 
date/time stamp to the test result report. It records when each test is 
performed.  
A 

Time Stamp GoTo

 line is added to the serial port menu to access a new 

sub-parameter pop-up menu. The pop-up menu allows the stamp to be 
turned on or off and the time and date to be set. Use the 

PREVIOUS

 and 

NEXT

 keypads to highlight the desired parameter. The highlighted setting 

may be adjusted with the 

INCREMENT

 and 

DECREMENT

 keypads. 

 
 
 
 
 
 
 
 
 

FIGURE 103 

 
When it is enabled, a tab-separated column is added to the serial string 
“Program Header” and “Data Logging” for the time stamp data. The date 
is in month/day/year format and the time is reported in military, (24 hr.), 
time with a hour:min:sec format. The date and time are separated with a 
space.  
 

Example Test Results Report 

 

Cycle   Prog    Test    Value   Units   Result  Date/Time 
 
1       1       PD      .005    PSIG    PASS    1/2/97 13:12:33 

 Back    Prev   Next    GoTo

      SERIAL PORT SET-UP      

      Baud Rate     9600      

      Data Bits        8      

      Stop Bits        1      

      Parity        none      

      Time Stamp    GoTo      

 Back    Prev   Next    Inc   Dec

     DATE/TIME STAMP SETUP

     RS232 Output       ON

       12/31/97 24:59:59

Appendix 29

 

Summary of Contents for SPRINT LC

















































































































































































































Reviews:

No comments

Related manuals for SPRINT LC

Hagie 2101 Operator'S Manual Supplement preview
2101
Brand: Hagie Pages: 61
JackJaw 301 Assembly And Operating Instructions preview
301
Brand: JackJaw Pages: 2
Omnia 11 Quick Start Installation Manual preview
11
Brand: Omnia Pages: 8
Panasonic WJHD100 - DIGITAL DISC RECORDE Specifications preview
WJHD100 - DIGITAL DISC RECORDE
Brand: Panasonic Pages: 7
DB Industries DELTA 2 User Instructions preview
DELTA 2
Brand: DB Industries Pages: 60
vc999 K5 Operating Manual preview
K5
Brand: vc999 Pages: 55
Salsbury Industries 3700 Series Manual preview
3700 Series
Brand: Salsbury Industries Pages: 4
Xebex Fitness ASK Owner'S Manual preview
ASK
Brand: Xebex Fitness Pages: 15
qeedo Buddy Manual preview
Buddy
Brand: qeedo Pages: 2
Gaspardo SP SPRINT Manual preview
SP SPRINT
Brand: Gaspardo Pages: 16
Gastrodomus PH100 Installation, Operating And Service Instructions preview
PH100
Brand: Gastrodomus Pages: 4
HANYOUNG NUX HL Series Instruction Manual preview
HL Series
Brand: HANYOUNG NUX Pages: 2
Gastrodomus CL Instructions For Use And Maintenance Manual preview
CL
Brand: Gastrodomus Pages: 39
Velp Scientifica ECO 8 Operation Manual preview
ECO 8
Brand: Velp Scientifica Pages: 12
Yamaha D24 Upgrade Manual preview
D24
Brand: Yamaha Pages: 24
J&M Nitro Gro 5010 Assembly Manual preview
Nitro Gro 5010
Brand: J&M Pages: 33
Keller HPX Operating Instructions Manual preview
HPX
Brand: Keller Pages: 12
MacDon D50 Installation Manual preview
D50
Brand: MacDon Pages: 49

Brands by name

Popular brands

Load more brands