Page 49
Surround Delay Using Meters
With Length and Width of the auditorium in meters, the surround delay, in ms, should be (L/3)-‐
(W/6)+20.
Surround Delay Using Feet
With Length and Width of the auditorium in feet, the surround delay, in ms, should be set to L-‐
(W/2)+20.
8.10.7
BLU LINK TAB
The BLU link tab has no effect unless a BLU link output board is installed in the JSD-‐60.
The Output Assignments section of the BLU link tab allows the user to specify what BLU link
channel a particular JSD-‐60 output will drive. The first column is an output number. The second
is the name of the output as defined on the Outputs tab. However, the Outputs tab refers to
channels and not bands. Therefore, the name (for example Left) refers only to a channel and
not a band. If the system is operating in biamp mode, output number one would actually be
