Page 89
Band2500=1
Band3150=1
Band4000=1
Band5000=1
Band6300=1
Band8000=1
Band10000=1
Band12500=1
Band16000=1
Treble=1
# The bass and treble are a shelving filter that are adjusted prior to
# the individual equalizer bands. That is if the respective bass/treble
# is enabled for automatic equalization. For each there is a cut off
# frequency and is specified below.
# Bass -‐ Low band range, specified in units of hertz.
# Treble -‐ High band range, specified in units of hertz.
[BassTrebleRange]
Bass=100
Treble=8000
X-‐Curve 150 Seats.ini
In the RTA view there is a set of upper, desired, and lower limit lines. The RTA bands are drawn
in columns with a rectangular indicator for its level. The columns are designed to line up with
the graphic equalizer controls below them. The limit lines follow this format in being shown as a
line at a given level for each band. Depending on the size of the auditorium, (then number of
seats), a respective set of limits is used, curve. The user can use the provided curve files located
in My Documents\USL\JSD-‐60\EQ Curves folder. As with other text based “.ini” files the user
can create custom curve files. The Automatic Equalization process will use the limits in the
setting the levels for each band.
[Curve]
Name=X-‐Curve150Seats
[Band25Hz]
Value=-‐3
Max=0
Min=-‐8
[Band31Hz]
Value=-‐2
Max=1
Min=-‐7
[Band40Hz]
Value=-‐1
Max=2
Min=-‐6
[Band50Hz]
Value=0
Max=3
Min=-‐5
[Band63Hz]
Value=0
Max=3
Min=-‐4
[Band80Hz]
