Pattern phrase playback using BPM detection
80
UDMR settings
1. Press the MODE button.
The MODE indicator light comes on.
2. Turn the SELECT dial to '8.2 AUDIO TEMPO' then
press the SELECT dial.
3. Use the SELECT dial to set the audio input to
'ON' then press the SELECT dial.
4. The confirmation screen is displayed. Press the
ENTER button to execute the operation.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
5. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a confirmation
screen asking you whether or not to cancel the setting. Please
note that selecting 'YES' and pressing the ENTER button
returns you to the default screen and cancels all settings made
up to that point.
Playback method
1. Input the audio signal to the AUDIO IN terminal.
2. Start the playback of a pattern phrase which has
the switchover timing set to 'BPM'.
The BPM indicator light comes on and the BPM is shown
on the Phrase no./BPM display.
3. Input the control signal to the 6 BPM COUNT
terminal.
BPM detection begins and the display changes as shown
in the diagram below.
Once the BPM has been successfully detected, the BPM
display flashes once and the detected BPM appears.
Phrase switchover is then performed based on the
detected BPM.
Even after successful detection of the BPM, the detection
continues as long as a control signal is input to the 6 BPM
COUNT terminal. The BPM display is updated when the
tempo of the input audio signal changes.
If the BPM detection fails, the playback continues at the BPM
configured for pattern phrases.
Even if a control signal is input to the 6 BPM COUNT terminal
before playback of the pattern phrase begins, the BPM
detection does not start.
Please therefore input the control signal to the 6 BPM COUNT
terminal after playback commences.
CAUTION
CAUTION
CAUTION
