Modifying recorded phrases (phrase settings)
43
3. Turn the SELECT dial to select the memory card
you wish to use.
Once you have chosen the memory card, press the
SELECT dial.
4. Turn the SELECT dial to choose the phrase
number of the new song phrase.
Once you have chosen the phrase number, press the
SELECT dial.
* You cannot select phrase numbers for which actual
phrases have been recorded.
5. Designate the phrase switchover method.
Once you have designated the method, press the
SELECT dial.
Switchover
method
Operation
Cut
Switches immediately to the next phrase.
On
Switches slowly to the next phrase.
6. When turning the fade to ON with the switchover
method, you must also designate the fade time
(time until total switchover).
Turn the SELECT dial to designate the fade time.
Once you have designated the fade time, press the
SELECT dial.
7. Next, you must register the phrase.
Turn the SELECT dial to designate the desired
registration number (No. 001- 100) then press the
SELECT dial.
8. Select the memory card containing the recorded
phrase.
Turn the SELECT dial to designate memory card A or B
then press the SELECT dial.
* Selecting '---' means that the phrase will not be
registered.
* When you select 'STOP' and designate the time as per
step 10 below, this time becomes the length of the
song phrase.
9. Select the phrase number of the phrase to be
registered.
Turn the SELECT dial to select the phrase number then
press the SELECT dial.
* Only available phrase numbers are displayed.
10. Designate the phrase playback start time.
Turn the SELECT dial to the desired time then press the
SELECT dial.
If a time code offset has been set for the phrase, that
value is automatically reflected.
* Pressing the STOP button changes the designated
time unit from frames
→
seconds
→
minutes
→
hours
respectively.
