7
InFusion Tank and Control Valve Preparation
1.
Lubricate the distributor O
-
ring and the outer tank O
-
ring.
2.
Install the upper basket on the bottom of the valve by lining up the tabs then turning the basket
clockwise to lock it in place. Place the upper basket over the distributor tube and push the valve on
the tank. Thread the valve on the tank by turning it clockwise. Be sure not to cross
-
thread the valve
on the tank.
3.
Tighten the valve hand tight, then snug it further by tapping it with the palm of the hand. DO NOT
use tools to tighten the valve or damage could occur.
