19
System Regeneration Using Onboard Buttons
Normal Operation
1. Home Display
The home display will alternate between the Time of Day and Gallons left until the next regen-
eration. The meter will count down to zero (0000) and then regenerate at the scheduled time
set.
Starting a Regeneration Cycle
1. To Start
Delayed Extra Cycle
•
If Days Remaining Until Next Regeneration does not read
‘000’,
press and hold the Set/
Change button for 3 seconds until the display reads
‘0000’
•
Regeneration cycle will initiate at the next designated regeneration time.
2. To start
Immediate Extra Cycle
First complete above step.
•
With Gallons Remaining Until Next Regeneration at
‘0000’,
•
Press and hold the
Set/Change
button.
•
After 3 seconds, the regeneration cycle will begin.
3. To
Fast Cycle
thru regeneration
First complete above 2 steps.
Note:
Press and hold the Set/Change button for 3 seconds to advance to the next cycle
step. Fast Cycle is not necessary unless desired to manually step through each cycle
step. (Repeat until valve returns to the home display)
Matrixx Cycles
Default (Min)
Step 1
Backwash
10
Step 3
Rest
2
Step 4
Rinse
10
